Here you can see quantities by unit of measure
| Unit of Measure | Quantity |
251 & 300mic textured pvc face film with a grey opaque polyester backing to minimise curl and anti-scratch coating that doesn't require lamination. Ideal for economical roller banner and hanging displays. Compatible with Solvent, UV and some Latex printers subject to testing.
Key Features
Relevant Techniques
Environmental Information
Additional Features
What can it be used for?
Discover Coala Stay Flat Rollerbanner, a premium textured PVC face film, featuring a grey opaque polyester backing to combat curling.
Coala Stay Flat is the optimum choice for cost-effective roller banners and light-blocking hanging signs, ideal for both indoor and outdoor use. Thanks to the anti-scratch coating, Coala Stay Flat Rollerbanner will need no lamination.
These Coala films are compatible with UV, (eco) solvent, and latex inkjet printing - including HP Latex.
However, please be aware: 25500, 26500, 28000, 250, 260, 280 and 500 Series are not suitable for printing via HP Latex due to high heat yield in the drying process.
Also note that solvent inks will typically not produce a finish as robust as other ink types and over lamination may be required in such case (print tests are highly recommended).
Coala Stay Flat is available 325gsm in two thicknesses, 250 and 300mic, and several sizes to cover all your business needs."
Request free A4 samples in our Sample service
Pre-printing
Before printing please note that it is necessary to check that the correct drying temperature has been set by carrying out a trial print. Too high drying temperatures can lead to a deformation of the film, which can later cause further problems while processing.
Printing
Before printing please note that it is necessary to check that the correct drying temperature has been set by carrying out a trial print. Too high drying temperatures can lead to a deformation of the film, which can later cause further problems while processing.
Finishing
textured matt
Technical datasheet
