image-from-the-document-manager

Olin Technical Information

 

logo_Olin_header_225x143.png

 

 

chbre_applications_247x148.jpg

Printing and handling guidelines

> Set up

  • Store at room temperature (17-23°C), at a relative humidity of 50%, from 24 to 48 hours before use
  • Protect the paper against any risk of moisture during the whole process. In particular unwrap the paper only at the last moment before printing and rewrap it immediately after the print run
  • Do not use set-off powder when printing

 

 

 

 

 

> Pre-press
Litho Offset suitable. Pre-printing: fully suitable
with Olin Regular from 80 to 150 gms.

> Printing
Large printed surface : under colour removal necessary.
Intense full colours: - black: blue support (40%) recommended.
Screen ruling: 150 max. Use of the Fogra 47 (uncoated)
profile is recommended, particularly when printing red tinted graphics.

>Finishing
Embossing and die-stamping: all techniques can be used.
Hot foil stamping: no precautions are necessary when using

the best foil for the chosen image and paper chosen.

Varnishing: possible but trials to be made first.
Lamination: not recommended.
Scoring: starting at 135g, scoring with counterpart.
Cutting: we recommend waiting 24 hours after printing.
Ensure that the blade of the guillotine is sharp enough
to order to avoid dust deposits.